dmesg - No Boost
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.7.10-1.16-desktop (geeko@buildhost) (gcc version 4.7.2 20130108 [gcc-4_7-branch revision 195012] (SUSE Linux) ) #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000008d34cfff] usable
BIOS-e820: [mem 0x000000008d34d000-0x000000008d787fff] reserved
BIOS-e820: [mem 0x000000008d788000-0x000000008d797fff] ACPI data
BIOS-e820: [mem 0x000000008d798000-0x000000008daf9fff] ACPI NVS
BIOS-e820: [mem 0x000000008dafa000-0x000000008e603fff] reserved
BIOS-e820: [mem 0x000000008e604000-0x000000008e604fff] usable
BIOS-e820: [mem 0x000000008e605000-0x000000008e80afff] ACPI NVS
BIOS-e820: [mem 0x000000008e80b000-0x000000008ec44fff] usable
BIOS-e820: [mem 0x000000008ec45000-0x000000008eff3fff] reserved
BIOS-e820: [mem 0x000000008eff4000-0x000000008effffff] usable
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: System manufacturer System Product Name/F2A85-M PRO, BIOS 6204 06/03/2013
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFF8000000 write-back
2 base 000088000000 mask FFFFFC000000 write-back
3 base 00008C000000 mask FFFFFE000000 write-back
4 base 00008E000000 mask FFFFFF000000 write-back
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0x8f000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x8f000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd8d0-0x000fd8df] mapped at [ffff8800000fd8d0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x8effffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0x8effffff] page 2M
kernel direct mapping tables up to 0x8effffff @ [mem 0x1fffe000-0x1fffffff]
init_memory_mapping: [mem 0x100001000-0x23effffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x1ffffffff] page 1G
[mem 0x200000000-0x23effffff] page 2M
kernel direct mapping tables up to 0x23effffff @ [mem 0x8effc000-0x8effffff]
RAMDISK: [mem 0x33f02000-0x35f78fff]
ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
ACPI: XSDT 000000008d78f078 00064 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 000000008d795e80 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120913/tbfadt-598)
ACPI: DSDT 000000008d78f170 06D0F (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 000000008daef080 00040
ACPI: APIC 000000008d795f90 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 000000008d796008 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 000000008d796050 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: BGRT 000000008d797178 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
ACPI: HPET 000000008d7960e8 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: SSDT 000000008d796120 00B9C (v01 AMD ANNAPURN 00000001 AMD 00000001)
ACPI: SSDT 000000008d796cc0 004B7 (v02 AMD ANNAPURN 00000001 MSFT 04000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
Initmem setup node 0 [mem 0x00000000-0x23effffff]
NODE_DATA [mem 0x23efec000-0x23effffff]
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880237200000-ffff88023d7fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x23effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009dfff]
node 0: [mem 0x00100000-0x8d34cfff]
node 0: [mem 0x8e604000-0x8e604fff]
node 0: [mem 0x8e80b000-0x8ec44fff]
node 0: [mem 0x8eff4000-0x8effffff]
node 0: [mem 0x100001000-0x23effffff]
On node 0 totalpages: 1885985
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3920 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 561100 pages, LIFO batch:31
Normal zone: 17864 pages used for memmap
Normal zone: 1288759 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228210 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000008d34d000 - 000000008d788000
PM: Registered nosave memory: 000000008d788000 - 000000008d798000
PM: Registered nosave memory: 000000008d798000 - 000000008dafa000
PM: Registered nosave memory: 000000008dafa000 - 000000008e604000
PM: Registered nosave memory: 000000008e605000 - 000000008e80b000
PM: Registered nosave memory: 000000008ec45000 - 000000008eff4000
PM: Registered nosave memory: 000000008f000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
PM: Registered nosave memory: 0000000100000000 - 0000000100001000
e820: [mem 0x8f000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88023ec00000 s81856 r8192 d20544 u524288
pcpu-alloc: s81856 r8192 d20544 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1853779
Policy zone: Normal
bootsplash: silent mode.
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 84000000
PM: Registered nosave memory: 0000000084000000 - 0000000088000000
Memory: 7260028k/9420800k available (5769k kernel code, 1876860k absent, 283912k reserved, 5184k data, 992k init)
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
NR_IRQS:33024 nr_irqs:712 16
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 30408704 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3848.021 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7696.04 BogoMIPS (lpj=3848021)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 008f000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20120913
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD A10-6700 APU with Radeon(tm) HD Graphics (fam: 15, model: 13, stepping: 01)
Performance Events:
perf: AMD core performance counters detected
AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (30784.16 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x8d798000-0x8daf9fff] (3547136 bytes)
PM: Registering ACPI NVS region [mem 0x8e605000-0x8e80afff] (2121728 bytes)
RTC time: 21:20:39, date: 09/14/13
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
pci 0000:00:01.0: [1002:990c] type 00 class 0x030000
pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
pci 0000:00:01.0: reg 18: [mem 0xfe800000-0xfe83ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
pci 0000:00:01.1: reg 10: [mem 0xfe844000-0xfe847fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:02.0: [1022:1412] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [1022:1413] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
pci 0000:00:11.0: reg 24: [mem 0xfe84e000-0xfe84e7ff]
pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xfe84d000-0xfe84dfff]
pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xfe84c000-0xfe84c0ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xfe84b000-0xfe84bfff]
pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xfe84a000-0xfe84a0ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xfe840000-0xfe843fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.3: [1022:43a3] type 01 class 0x060400
pci 0000:00:15.3: supports D1 D2
pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
pci 0000:00:16.0: reg 10: [mem 0xfe849000-0xfe849fff]
pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
pci 0000:00:16.2: reg 10: [mem 0xfe848000-0xfe8480ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
pci 0000:01:00.0: [1912:0014] type 00 class 0x0c0330
pci 0000:01:00.0: reg 10: [mem 0xfe700000-0xfe701fff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:02:00.0: [104c:823e] type 01 class 0x060400
pci 0000:02:00.0: reg 14: [mem 0xfe500000-0xfe500fff]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 02-03]
pci 0000:00:03.0: bridge window [mem 0xfe400000-0xfe5fffff]
pci 0000:03:00.0: [104c:823f] type 00 class 0x0c0010
pci 0000:03:00.0: reg 10: [mem 0xfe404000-0xfe4047ff]
pci 0000:03:00.0: reg 14: [mem 0xfe400000-0xfe403fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
pci 0000:05:00.0: [1131:7164] type 00 class 0x048000
pci 0000:05:00.0: reg 10: [mem 0xfe000000-0xfe3fffff 64bit]
pci 0000:05:00.0: reg 18: [mem 0xfdc00000-0xfdffffff 64bit]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [mem 0xfdc00000-0xfe3fffff]
pci 0000:06:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:06:00.0: reg 10: [mem 0xfe600000-0xfe607fff 64bit]
pci 0000:06:00.0: PME# supported from D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 06]
pci 0000:00:15.1: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:07:00.0: reg 10: [io 0xe000-0xe0ff]
pci 0000:07:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:07:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.2: PCI bridge to [bus 07]
pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:08:00.0: [1131:7164] type 00 class 0x048000
pci 0000:08:00.0: reg 10: [mem 0xfd800000-0xfdbfffff 64bit]
pci 0000:08:00.0: reg 18: [mem 0xfd400000-0xfd7fffff 64bit]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2
pci 0000:00:15.3: PCI bridge to [bus 08]
pci 0000:00:15.3: bridge window [mem 0xfd400000-0xfdbfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE23._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x18) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 6 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x8d34d000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8e605000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8ec45000-0x8fffffff]
e820: reserve RAM buffer [mem 0x8f000000-0x8fffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x03af window]
pnp 00:00: [io 0x03e0-0x0cf7 window]
pnp 00:00: [io 0x03b0-0x03df window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000dffff window]
pnp 00:00: [mem 0xc0000000-0xffffffff window]
pnp 00:00: [mem 0x00000000 window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [mem 0xe0000000-0xefffffff]
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [mem 0x90000000-0xbfffffff]
system 00:02: [mem 0x90000000-0xbfffffff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [io 0x0010-0x001f]
pnp 00:04: [io 0x0022-0x003f]
pnp 00:04: [io 0x0063]
pnp 00:04: [io 0x0065]
pnp 00:04: [io 0x0067-0x006f]
pnp 00:04: [io 0x0072-0x007f]
pnp 00:04: [io 0x0080]
pnp 00:04: [io 0x0084-0x0086]
pnp 00:04: [io 0x0088]
pnp 00:04: [io 0x008c-0x008e]
pnp 00:04: [io 0x0090-0x009f]
pnp 00:04: [io 0x00a2-0x00bf]
pnp 00:04: [io 0x00b1]
pnp 00:04: [io 0x00e0-0x00ef]
pnp 00:04: [io 0x04d0-0x04d1]
pnp 00:04: [io 0x040b]
pnp 00:04: [io 0x04d6]
pnp 00:04: [io 0x0c00-0x0c01]
pnp 00:04: [io 0x0c14]
pnp 00:04: [io 0x0c50-0x0c51]
pnp 00:04: [io 0x0c52]
pnp 00:04: [io 0x0c6c]
pnp 00:04: [io 0x0c6f]
pnp 00:04: [io 0x0cd0-0x0cd1]
pnp 00:04: [io 0x0cd2-0x0cd3]
pnp 00:04: [io 0x0cd4-0x0cd5]
pnp 00:04: [io 0x0cd6-0x0cd7]
pnp 00:04: [io 0x0cd8-0x0cdf]
pnp 00:04: [io 0x0800-0x089f]
pnp 00:04: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:04: [io 0x0000-0x000f]
pnp 00:04: [io 0x0b20-0x0b3f]
pnp 00:04: [io 0x0900-0x090f]
pnp 00:04: [io 0x0910-0x091f]
pnp 00:04: [io 0xfe00-0xfefe]
pnp 00:04: [io 0x0060-0x005f disabled]
pnp 00:04: [io 0x0064-0x0063 disabled]
pnp 00:04: [mem 0xfec00000-0xfec00fff]
pnp 00:04: [mem 0xfee00000-0xfee00fff]
pnp 00:04: [mem 0xfed80000-0xfed8ffff]
pnp 00:04: [mem 0xfed61000-0xfed70fff]
pnp 00:04: [mem 0xfec10000-0xfec10fff]
pnp 00:04: [mem 0xfed00000-0xfed00fff]
pnp 00:04: [mem 0xff000000-0xffffffff]
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: [io 0x040b] has been reserved
system 00:04: [io 0x04d6] has been reserved
system 00:04: [io 0x0c00-0x0c01] has been reserved
system 00:04: [io 0x0c14] has been reserved
system 00:04: [io 0x0c50-0x0c51] has been reserved
system 00:04: [io 0x0c52] has been reserved
system 00:04: [io 0x0c6c] has been reserved
system 00:04: [io 0x0c6f] has been reserved
system 00:04: [io 0x0cd0-0x0cd1] has been reserved
system 00:04: [io 0x0cd2-0x0cd3] has been reserved
system 00:04: [io 0x0cd4-0x0cd5] has been reserved
system 00:04: [io 0x0cd6-0x0cd7] has been reserved
system 00:04: [io 0x0cd8-0x0cdf] has been reserved
system 00:04: [io 0x0800-0x089f] has been reserved
system 00:04: [io 0x0b20-0x0b3f] has been reserved
system 00:04: [io 0x0900-0x090f] has been reserved
system 00:04: [io 0x0910-0x091f] has been reserved
system 00:04: [io 0xfe00-0xfefe] has been reserved
system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:04: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:04: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:04: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:04: [mem 0xff000000-0xffffffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:05: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:05: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:05: [io 0x0290-0x029f]
pnp 00:05: [io 0x0000-0xffffffffffffffff disabled]
system 00:05: [io 0x0290-0x029f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 4]
pnp 00:06: [io 0x0000-0x000f]
pnp 00:06: [io 0x0081-0x0083]
pnp 00:06: [io 0x0087]
pnp 00:06: [io 0x0089-0x008b]
pnp 00:06: [io 0x008f]
pnp 00:06: [io 0x00c0-0x00df]
pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:07: [io 0x0070-0x0071]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io 0x0061]
pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0044-0x005f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x04d0-0x04d1]
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x00f0-0x00ff]
pnp 00:0a: [irq 13]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [io 0x03f8-0x03ff]
pnp 00:0c: [irq 4]
pnp 00:0c: [dma 0 disabled]
pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0d: [mem 0xfed00000-0xfed003ff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:03.0: PCI bridge to [bus 02-03]
pci 0000:00:03.0: bridge window [mem 0xfe400000-0xfe5fffff]
pci 0000:00:14.4: PCI bridge to [bus 04]
pci 0000:00:15.0: PCI bridge to [bus 05]
pci 0000:00:15.0: bridge window [mem 0xfdc00000-0xfe3fffff]
pci 0000:00:15.1: PCI bridge to [bus 06]
pci 0000:00:15.1: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:15.2: PCI bridge to [bus 07]
pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:15.3: PCI bridge to [bus 08]
pci 0000:00:15.3: bridge window [mem 0xfd400000-0xfdbfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe5fffff]
pci_bus 0000:03: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:04: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 10 [mem 0xc0000000-0xffffffff]
pci_bus 0000:05: resource 1 [mem 0xfdc00000-0xfe3fffff]
pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xfd400000-0xfdbfffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 33244k freed
PCI-DMA: Disabling AGP.
PCI-DMA: More than 4GB of RAM and no IOMMU
falling back to iommu=soft.
More than 4GB of memory but GART IOMMU not available.
falling back to iommu=soft.
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x8934d000-0x8d34cfff] (64MB) mapped at [ffff88008934d000-ffff88008d34cfff]
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1379193639.661:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 14244
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90011600000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
GHES: HEST is not enabled!
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: irq 40 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio sxs
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe84e000 port 0xfe84e100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xfe84e000 port 0xfe84e180 irq 40
ata3: SATA max UDMA/133 abar m2048@0xfe84e000 port 0xfe84e200 irq 40
ata4: SATA max UDMA/133 abar m2048@0xfe84e000 port 0xfe84e280 irq 40
ata5: SATA max UDMA/133 abar m2048@0xfe84e000 port 0xfe84e300 irq 40
ata6: SATA max UDMA/133 abar m2048@0xfe84e000 port 0xfe84e380 irq 40
ata7: SATA max UDMA/133 abar m2048@0xfe84e000 port 0xfe84e400 irq 40
ata8: SATA max UDMA/133 abar m2048@0xfe84e000 port 0xfe84e480 irq 40
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe84c000
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.7.10-1.16-desktop ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe84a000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.7.10-1.16-desktop ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe848000
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.7.10-1.16-desktop ehci_hcd
usb usb3: SerialNumber: 0000:00:16.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe84d000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI Host Controller
usb usb4: Manufacturer: Linux 3.7.10-1.16-desktop ohci_hcd
usb usb4: SerialNumber: 0000:00:12.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe84b000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI Host Controller
usb usb5: Manufacturer: Linux 3.7.10-1.16-desktop ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe849000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 3.7.10-1.16-desktop ohci_hcd
usb usb6: SerialNumber: 0000:00:16.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 10
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Key type dns_resolver registered
PM: Checking hibernation image partition /dev/disk/by-id/ata-Maxtor_4W060H4_W406YA8C-part2
ata2: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: Samsung SSD 840 Series, DXT08B0Q, max UDMA/133
ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXT0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: ATA-9: WDC WD30EFRX-68AX9N0, 80.00A80, max UDMA/133
ata5.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA WDC WD30EFRX-68A 80.0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 4:0:0:0: [sdb] 4096-byte physical blocks
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI disk
usb 1-1: New USB device found, idVendor=12c8, idProduct=1f03
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: NDAS / USB 2.0 Storage Device
usb 1-1: Manufacturer: XIMETA, Inc
usb 1-1: SerialNumber: 932B00B0
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 13:569:348
rtc_cmos 00:07: setting system clock to 2013-09-14 21:20:40 UTC (1379193640)
Freeing unused kernel memory: 992k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 364k freed
Freeing unused kernel memory: 108k freed
alua: device handler registered
hp_sw: device handler registered
emc: device handler registered
rdac: device handler registered
systemd-udevd[127]: starting version 195
ACPI: acpi_idle registered with cpuidle
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 7
xhci_hcd 0000:01:00.0: irq 18, io mem 0xfe700000
xhci_hcd 0000:01:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:01:00.0: irq 45 for MSI/MSI-X
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: xHCI Host Controller
usb usb7: Manufacturer: Linux 3.7.10-1.16-desktop xhci_hcd
usb usb7: SerialNumber: 0000:01:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
xhci_hcd 0000:01:00.0: xHCI Host Controller
xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 8
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 3.7.10-1.16-desktop xhci_hcd
usb usb8: SerialNumber: 0000:01:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 4 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 9
[fglrx] Maximum main memory to use for locked dma buffers: 6905 MBytes.
[fglrx] vendor: 1002 device: 990c count: 1
[fglrx] ioport: bar 1, base 0xf000, size: 0x100
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 12.10.5 [Mar 28 2013] with 1 minors
xhci_hcd 0000:06:00.0: irq 17, io mem 0xfe600000
xhci_hcd 0000:06:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:06:00.0: irq 50 for MSI/MSI-X
usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: xHCI Host Controller
usb usb9: Manufacturer: Linux 3.7.10-1.16-desktop xhci_hcd
usb usb9: SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 10
usb usb10: New USB device found, idVendor=1d6b, idProduct=0003
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: xHCI Host Controller
usb usb10: Manufacturer: Linux 3.7.10-1.16-desktop xhci_hcd
usb usb10: SerialNumber: 0000:06:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 2 ports detected
tsc: Refined TSC clocksource calibration: 3848.141 MHz
Switching to clocksource tsc
usb 3-3: new high-speed USB device number 2 using ehci_hcd
usb 3-3: New USB device found, idVendor=0bc2, idProduct=2300
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-3: Product: Portable
usb 3-3: Manufacturer: Seagate
usb 3-3: SerialNumber: 2GH1130K
usb 5-2: new low-speed USB device number 2 using ohci_hcd
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
usb 5-2: New USB device found, idVendor=15c2, idProduct=0043
usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
systemd[1]: systemd 195 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; suse)
systemd[1]: Inserted module 'autofs4'
systemd[1]: Set hostname to .
systemd[1]: Starting Replay Read-Ahead Data...
systemd[1]: Starting Collect Read-Ahead Data...
systemd-readahead[273]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Remote File Systems.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dSamsung_SSD_840_Series_S19HNSAD622147R\x2dpart1.device...
systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dSamsung_SSD_840_Series_S19HNSAD622147R\x2dpart3.device...
systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dWDC_WD30EFRX\x2d68AX9N0_WD\x2dWCC1T1131255\x2dpart1.device...
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Starting Create dynamic rule for /dev/root link...
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd[1]: Starting LSB: Set default boot entry if called...
systemd[1]: Started Replay Read-Ahead Data.
systemd[1]: Started Collect Read-Ahead Data.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting Remount Root and Kernel File Systems...
nct6775: Found NCT6779D or compatible chip at 0x2e:0x290
EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
usb 5-4: new full-speed USB device number 3 using ohci_hcd
systemd-udevd[308]: starting version 195
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
wmi: Mapper loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 4:0:0:0: Attached scsi generic sg1 type 0
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
Linux video capture interface: v2.00
saa7164 driver loaded
CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected]
saa7164[0]/0: found at 0000:05:00.0, rev: 129, irq: 16, latency: 0, mmio: 0xfe000000
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:07:00.0: irq 51 for MSI/MSI-X
Initializing USB Mass Storage driver...
scsi8 : usb-storage 1-1:1.0
r8169 0000:07:00.0 eth0: RTL8168f/8111f at 0xffffc900115b0000, 08:60:6e:d4:9c:47, XID 08000800 IRQ 51
r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usb-storage 3-3:1.0: Quirks match for vid 0bc2 pid 2300: 200000
scsi9 : usb-storage 3-3:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
input: PC Speaker as /devices/platform/pcspkr/input/input2
microcode: CPU0: patch_level=0x06001119
microcode: CPU1: patch_level=0x06001119
microcode: CPU2: patch_level=0x06001119
microcode: CPU3: patch_level=0x06001119
microcode: Microcode Update Driver: v2.00 , Peter Oruba
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0[ 2.805888] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input3
asus_wmi: Disabling ACPI video driver
ALSA hda_intel.c:2902 Using LPIB position fix
ALSA hda_intel.c:3019 Force to non-snoop mode
snd_hda_intel 0000:00:01.1: irq 52 for MSI/MSI-X
firewire_ohci 0000:03:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x2
ALSA hda_intel.c:1680 Enable sync_write for stable communication
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
ALSA hda_intel.c:2902 Using LPIB position fix
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
acpi-cpufreq: overriding BIOS provided _PSD data
ALSA hda_intel.c:1680 Enable sync_write for stable communication
ALSA patch_realtek.c:1241 SKU: Nid=0x1d sku_cfg=0x4005e601
ALSA patch_realtek.c:1243 SKU: port_connectivity=0x1
ALSA patch_realtek.c:1244 SKU: enable_pcbeep=0x0
ALSA patch_realtek.c:1245 SKU: check_sum=0x00000005
ALSA patch_realtek.c:1246 SKU: customization=0x000000e6
ALSA patch_realtek.c:1247 SKU: external_amp=0x0
ALSA patch_realtek.c:1248 SKU: platform_type=0x0
ALSA patch_realtek.c:1249 SKU: swap=0x0
ALSA patch_realtek.c:1250 SKU: override=0x1
ALSA hda_auto_parser.c:318 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
ALSA hda_auto_parser.c:322 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA hda_auto_parser.c:326 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA hda_auto_parser.c:327 mono: mono_out=0x0
ALSA hda_auto_parser.c:330 dig-out=0x11/0x1e
ALSA hda_auto_parser.c:331 inputs:
ALSA hda_auto_parser.c:335 Rear Mic=0x18
ALSA hda_auto_parser.c:335 Front Mic=0x19
ALSA hda_auto_parser.c:335 Line=0x1a
ALSA patch_realtek.c:1304 realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
ALSA patch_realtek.c:1320 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
saa7164_downloadfirmware() no first image
saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
saa7164_downloadfirmware() firmware read 4019072 bytes.
saa7164_downloadfirmware() firmware loaded.
Firmware file header part 1:
.FirmwareSize = 0x0
.BSLSize = 0x0
.Reserved = 0x3d538
.Version = 0x3
saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
saa7164_downloadfirmware() FirmwareSize = 0x1fd6
saa7164_downloadfirmware() BSLSize = 0x0
saa7164_downloadfirmware() Reserved = 0x0
saa7164_downloadfirmware() Version = 0x1661c00
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: acl,user_xattr
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
usb 5-4: New USB device found, idVendor=0a12, idProduct=0001
usb 5-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
input: iMON Panel, Knob and Mouse(15c2:0043) as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input14
systemd-journald[280]: Received SIGUSR1
Registered IR keymap rc-imon-pad
input: iMON Remote (15c2:0043) as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/rc/rc0/input15
rc0: iMON Remote (15c2:0043) as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/rc/rc0
imon 5-2:1.0: iMON device (15c2:0043, intf0) on usb initialized
imon 5-2:1.1: iMON device (15c2:0043, intf1) on usb initialized
usbcore: registered new interface driver imon
Adding 8388604k swap on /work/swapfile. Priority:-1 extents:6 across:426311676k
firewire_core 0000:03:00.0: created device fw0: GUID 785634120000006e, S800
usb 4-2: new full-speed USB device number 2 using ohci_hcd
usb 4-2: New USB device found, idVendor=046d, idProduct=c52b
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB Receiver
usb 4-2: Manufacturer: Logitech
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-2/input2
input: Logitech Unifying Device. Wireless PID:400e as /devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.2/0003:046D:C52B.0003/input/input16
logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:400e] on usb-0000:00:12.0-2:1
scsi 9:0:0:0: Direct-Access Seagate Portable 0130 PQ: 0 ANSI: 4
sd 9:0:0:0: Attached scsi generic sg2 type 0
sd 9:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 9:0:0:0: [sdc] Write Protect is off
sd 9:0:0:0: [sdc] Mode Sense: 2f 08 00 00
sd 9:0:0:0: [sdc] No Caching mode page present
sd 9:0:0:0: [sdc] Assuming drive cache: write back
sd 9:0:0:0: [sdc] No Caching mode page present
sd 9:0:0:0: [sdc] Assuming drive cache: write back
sdc: sdc1
sd 9:0:0:0: [sdc] No Caching mode page present
sd 9:0:0:0: [sdc] Assuming drive cache: write back
sd 9:0:0:0: [sdc] Attached SCSI disk
usb 7-2: new high-speed USB device number 2 using xhci_hcd
scsi 8:0:0:0: Direct-Access WDC WD25 00JB-00GVC0 08.0 PQ: 0 ANSI: 2
sd 8:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:0: [sdd] 488393072 512-byte logical blocks: (250 GB/232 GiB)
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00
sd 8:0:0:0: [sdd] No Caching mode page present
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sd 8:0:0:0: [sdd] No Caching mode page present
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 8:0:0:0: [sdd] No Caching mode page present
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sd 8:0:0:0: [sdd] Attached SCSI disk
usb 7-2: New USB device found, idVendor=046d, idProduct=0829
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: Webcam C110
usb 7-2: Manufacturer:
uvcvideo: Found UVC 1.00 device Webcam C110 (046d:0829)
input: Webcam C110 as /devices/pci0000:00/0000:00:02.0/0000:01:00.0/usb7/7-2/7-2:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usbcore: registered new interface driver snd-usb-audio
usb 9-2: new high-speed USB device number 2 using xhci_hcd
usb 9-2: New USB device found, idVendor=046d, idProduct=082d
usb 9-2: New USB device strings: Mfr=0, Product=2, SerialNumber=1
usb 9-2: Product: HD Pro Webcam C920
usb 9-2: SerialNumber: 7E3CA9EF
uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)
input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:15.1/0000:06:00.0/usb9/9-2/9-2:1.0/input/input18
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: acl
ALSA mixer.c:887 5:2: cannot get min/max values for control 2 (id 5)
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: acl
saa7164_downloadimage() Image downloaded, booting...
saa7164_downloadimage() Image booted successfully.
starting firmware download(2)
saa7164_downloadimage() Image downloaded, booting...
saa7164_downloadimage() Image booted successfully.
firmware download complete.
tveeprom 1-0000: Hauppauge model 88061, rev C4F2, serial# 8523644
tveeprom 1-0000: MAC address is 00:0d:fe:82:0f:7c
tveeprom 1-0000: tuner model is NXP 18271C2_716x (idx 152, type 4)
tveeprom 1-0000: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
tveeprom 1-0000: audio processor is SAA7164 (idx 43)
tveeprom 1-0000: decoder processor is SAA7164 (idx 40)
tveeprom 1-0000: has radio, has IR receiver, has no IR transmitter
saa7164[0]: Hauppauge eeprom: model=88061
tda18271 2-0060: creating new instance
TDA18271HD/C2 detected @ 2-0060
DVB: registering new adapter (saa7164)
saa7164 0000:05:00.0: DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
tda18271 3-0060: creating new instance
TDA18271HD/C2 detected @ 3-0060
tda18271: performing RF tracking filter calibration
tda18271: RF tracking filter calibration complete
DVB: registering new adapter (saa7164)
saa7164 0000:05:00.0: DVB: registering adapter 1 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
saa7164[0]: registered device video2 [mpeg]
saa7164[0]: registered device video3 [mpeg]
saa7164[0]: registered device vbi0 [vbi]
saa7164[0]: registered device vbi1 [vbi]
CORE saa7164[1]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected]
saa7164[1]/0: found at 0000:08:00.0, rev: 129, irq: 19, latency: 0, mmio: 0xfd800000
saa7164_downloadfirmware() no first image
saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
saa7164_downloadfirmware() firmware read 4019072 bytes.
saa7164_downloadfirmware() firmware loaded.
Firmware file header part 1:
.FirmwareSize = 0x0
.BSLSize = 0x0
.Reserved = 0x3d538
.Version = 0x3
saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
saa7164_downloadfirmware() FirmwareSize = 0x1fd6
saa7164_downloadfirmware() BSLSize = 0x0
saa7164_downloadfirmware() Reserved = 0x0
saa7164_downloadfirmware() Version = 0x1661c00
saa7164_downloadimage() Image downloaded, booting...
saa7164_downloadimage() Image booted successfully.
starting firmware download(2)
saa7164_downloadimage() Image downloaded, booting...
saa7164_downloadimage() Image booted successfully.
firmware download complete.
tveeprom 4-0000: Hauppauge model 88061, rev C4F2, serial# 8538131
tveeprom 4-0000: MAC address is 00:0d:fe:82:48:13
tveeprom 4-0000: tuner model is NXP 18271C2_716x (idx 152, type 4)
tveeprom 4-0000: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
tveeprom 4-0000: audio processor is SAA7164 (idx 43)
tveeprom 4-0000: decoder processor is SAA7164 (idx 40)
tveeprom 4-0000: has radio, has IR receiver, has no IR transmitter
saa7164[1]: Hauppauge eeprom: model=88061
tda18271 5-0060: creating new instance
TDA18271HD/C2 detected @ 5-0060
DVB: registering new adapter (saa7164)
saa7164 0000:08:00.0: DVB: registering adapter 2 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
tda18271 6-0060: creating new instance
TDA18271HD/C2 detected @ 6-0060
tda18271: performing RF tracking filter calibration
tda18271: RF tracking filter calibration complete
DVB: registering new adapter (saa7164)
saa7164 0000:08:00.0: DVB: registering adapter 3 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
saa7164[1]: registered device video4 [mpeg]
saa7164[1]: registered device video5 [mpeg]
saa7164[1]: registered device vbi2 [vbi]
saa7164[1]: registered device vbi3 [vbi]
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8169 0000:07:00.0 eth0: link down
r8169 0000:07:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
fglrx_pci 0000:00:01.0: irq 53 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1356
[fglrx] Firegl kernel thread PID: 1357
[fglrx] Firegl kernel thread PID: 1358
[fglrx] IRQ 53 Enabled
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fb7c000, size:484000
[fglrx] Reserved FB block: Unshared offset:2ffee000, size:12000
ALSA hda_eld.c:337 HDMI: ELD buf size is 0, force 128
ALSA hda_eld.c:356 HDMI: invalid ELD data byte 0
ALSA hda_eld.c:337 HDMI: ELD buf size is 0, force 128
ALSA hda_eld.c:356 HDMI: invalid ELD data byte 0
tda18271: performing RF tracking filter calibration
ALSA hda_eld.c:337 HDMI: ELD buf size is 0, force 128
ALSA hda_eld.c:356 HDMI: invalid ELD data byte 0
r8169 0000:07:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NET: Registered protocol family 17
ALSA hda_eld.c:337 HDMI: ELD buf size is 0, force 128
ALSA hda_eld.c:356 HDMI: invalid ELD data byte 0
ALSA hda_eld.c:337 HDMI: ELD buf size is 0, force 128
ALSA hda_eld.c:356 HDMI: invalid ELD data byte 0
ALSA hda_eld.c:337 HDMI: ELD buf size is 0, force 128
ALSA hda_eld.c:356 HDMI: invalid ELD data byte 0
ALSA hda_eld.c:337 HDMI: ELD buf size is 0, force 128
ALSA hda_eld.c:356 HDMI: invalid ELD data byte 0
ALSA hda_eld.c:337 HDMI: ELD buf size is 0, force 128
ALSA hda_eld.c:356 HDMI: invalid ELD data byte 0
ALSA hda_eld.c:337 HDMI: ELD buf size is 0, force 128
ALSA hda_eld.c:356 HDMI: invalid ELD data byte 0
ALSA hda_eld.c:337 HDMI: ELD buf size is 0, force 128
ALSA hda_eld.c:356 HDMI: invalid ELD data byte 0
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:0a60:6eff:fed4:9c47 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=410 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=370
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:0a60:6eff:fed4:9c47 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=243 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=203
tda18271: RF tracking filter calibration complete
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:0a60:6eff:fed4:9c47 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=410 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=370
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:0a60:6eff:fed4:9c47 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:0a60:6eff:fed4:9c47 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=410 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=370
tda18271: performing RF tracking filter calibration
fuse init (API version 7.20)
tda18271: RF tracking filter calibration complete
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=08:60:6e:d4:9c:47:00:24:b2:60:d0:08:08:00 SRC=192.168.1.1 DST=192.168.1.210 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=13777 DF PROTO=UDP SPT=1088 DPT=137 LEN=58
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:0a60:6eff:fed4:9c47 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=08:60:6e:d4:9c:47:00:24:b2:60:d0:08:08:00 SRC=192.168.1.1 DST=192.168.1.210 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=13781 DF PROTO=UDP SPT=1088 DPT=137 LEN=58
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:0a60:6eff:fed4:9c47 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=08:60:6e:d4:9c:47:00:24:b2:60:d0:08:08:00 SRC=192.168.1.1 DST=192.168.1.210 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=13784 DF PROTO=UDP SPT=1088 DPT=137 LEN=58
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
[fglrx:firegl_apl_loadDatabase] *ERROR* APL: apl initialize fail.
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:0a60:6eff:fed4:9c47 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=08:60:6e:d4:9c:47:00:24:b2:60:d0:08:08:00 SRC=192.168.1.1 DST=192.168.1.210 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=13790 DF PROTO=UDP SPT=1088 DPT=137 LEN=58
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC=08:60:6e:d4:9c:47:00:24:b2:60:d0:08:08:00 SRC=192.168.1.1 DST=192.168.1.210 LEN=78 TOS=0x00 PREC=0x00 TTL=64 ID=13794 DF PROTO=UDP SPT=1088 DPT=137 LEN=58
SFW2-INext-DROP-DEFLT IN=eth0 OUT= MAC= SRC=fe80:0000:0000:0000:0a60:6eff:fed4:9c47 DST=ff02:0000:0000:0000:0000:0000:0000:00fb LEN=84 TC=0 HOPLIMIT=255 FLOWLBL=0 PROTO=UDP SPT=5353 DPT=5353 LEN=44